Bobovr z4 lens settings/profiles please

Trinus Forum › Forums › Shared Lens distortion settings › Bobovr z4 lens settings/profiles please

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 20, 2016 at 2:14 am #5381
    AvatarmaxVRz4
    Participant

    I need bobo vr z4 configuration

    • This topic was modified 4 years, 10 months ago by AvatarmaxVRz4.
    July 1, 2016 at 4:23 pm #5542
    Avatarkazuma_kun
    Participant

    I am needing the same thing. So far I have just been using the built in Cardboard 5.5″ setting in Trinus but something specific to Bobovr Z4 would be nice.

    July 2, 2016 at 11:14 am #5551
    loxailoxai
    Keymaster

    You can use Lens adjust, set the right parameters manually and share here 🙂

    August 15, 2016 at 8:01 pm #5710
    Avatarxtrex
    Participant

    Hi guys,
    if you’re interested, you can try these lens correction parameters for the Bobovr Z4:

    [Bobovr Z4] [5.5″)]
    Screen X: 47
    Screen Y: 49
    Lens X: 49
    Lens Y: 50
    Scale X: 24
    Scale Y: 34
    Warp X: 52
    Warp Y: 41
    Warp Z: 15
    Chroma: 10

    The settings are by no means perfect, but seem to work well enough with my Redmi Note 3. Feel free to do some fine-tuning and be sure to share your own settings here 🙂

    August 17, 2016 at 4:04 pm #5713
    Avatarxtrex
    Participant

    And if you would like bigger fov (at the expense of slightly cut edges/corners of the screen), you can try these parameters as well:

    [BoboVR Z4] [5.5″]
    Screen X: 47
    Screen Y: 49
    Lens X: 50
    Lens Y: 45
    Scale X: 58
    Scale Y: 74
    Warp X: 100
    Warp Y: 61
    Warp Z: 0
    Chroma: 10

    December 31, 2017 at 12:56 pm #7389
    AvatarVladislav
    Participant

    Who can write a configuration for 5?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.