Windows 10 and PS VR | Trinus Virtual Reality

This topic has 12 replies, 7 voices, and was last updated 1 year, 8 months ago by bones.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
December 18, 2016 at 11:38 am #6316

legrooch
Participant

Hello,

I tried last build on Windows 10 x64.
PS VR connected by USB 3.0, no optional HDMI.
Steam drivers installed.

On Device Manager there are 3 devices without correct drivers – PS VR 3D Audio, Bulkin and H.264
Drivers from Trinus folder are installed.
When PS VR is on, I see problem with USB. Two different cables were tested without success.

What next I can do?

Regards
Leszek

December 18, 2016 at 11:48 am #6317

loxai
Keymaster

Just to confirm, did you follow the connection diagram and have both usb and hdmi connected as shown?
Are you using amd or nvidia?

December 18, 2016 at 5:05 pm #6319

legrooch
Participant

Yes, ofcourse.
HDMI connected on My nVidia 980GTX from PS4 socket, USB connected to 3.0
Devices from PS VR are visible in Device Manager. In Display settings second device is set to extended desktop.

December 24, 2016 at 12:57 am #6329

klimmiks
Participant

Hi there – I’ve seen some people suggest to try a USB 2.0 port – let me know how that goes. Worth a shot if you have one. If you haven’t tried the driver installer in the EXT folders, give that a shot as well.

December 24, 2016 at 11:12 am #6332
legrooch
Participant
I tried both USB types – 2.0 and 3.0. Front and back on my PC – nothing helps.
- This reply was modified 5 years, 7 months ago by legrooch.
December 24, 2016 at 11:19 am #6334
legrooch
Participant
Link to last image with USB drivers, because forum changed size…
https://s29.postimg.org/7o3c8xh1z/usb_drivers.jpg
- This reply was modified 5 years, 7 months ago by legrooch.
December 28, 2016 at 4:08 pm #6354

legrooch
Participant

Ok, on new version Trinuspsvr started correctly.
Now I cannot run SteamVR, that will recognize PS VR, but there is a hope 🙂

December 28, 2016 at 7:04 pm #6355

legrooch
Participant

Ok – another problem.
I’m getting 125 from SteamVR. I tried all from “How to”-> “Set up” and “Troubleshoting”.
I made all combinations – first installing driver, first starting TrinusPSVR, first running SteamVR…

Still same – 125 Headset is not connected.
When starting Room Setup \/

One more thing – is there anyone, who have all three deviced discovered correctly and drivers are installed for them? 3D Audio, Bulkin and H.264?

January 5, 2017 at 11:12 pm #6487

OneColdCanuck
Participant

I have the same issue, with the same setup. When I hit the <Start> button in Trinus PSVR (Beta 0.5) the “No USB” icon disappears, but it is replaced with a black screen. I also have warning icons on the 3 devices mentioned.

With SteamVR running, you can see that the tracking portion is working, but there is absolutely no display in the headset.

January 7, 2017 at 10:12 pm #6503

sithian8
Participant

My PC isn’t even detecting my headset as a display.

February 20, 2017 at 8:04 pm #6791
johanvd82
Participant
I’m running 0.5.4 on Windows 10 and it is also not picking up my ps vr as a second monitor. Has anybody been able to get around this? I have double checked that everything is connected as per the diagram.
- This reply was modified 5 years, 6 months ago by johanvd82.
February 21, 2017 at 10:44 pm #6800

loxai
Keymaster

Unfortunately, I do not have a solution for no display/usb issues. Worth noting that having the three device warnings is normal and is not related to the problem.
Make sure you review the troubleshooting.

December 5, 2020 at 7:50 pm #8823

bones
Participant

Bump

I too am suffering from error 125 on Steam VR and the PSVR is not detected as a second display but does appear in device mgr with the associated sound “errors”. Has a solution been found?

Win 10 64
Strix B550-F Gaming
Ryzen 9
Radeon RX5700 XT (software 20.11.3)
Trinus VR 1.0.9

I do get display in headset, but no tracking. Primary monitor displays a single “curved” vice a stereoscopic flat image.
Author

Posts